MALIARI PRO / Guides

A better finish starts with the right questions.

Practical information for planning painting work, choosing materials and preparing surfaces.

These guides are about planning painting work: how to describe the condition of a wall, what belongs in a quote, which material suits which surface, and how to check finished work. They do not sell a particular product and they publish no unconfirmed rates.

Where to start reading

If the renovation is only beginning, start with preparation and the cost guide — that is where what the job includes is actually decided. If the wall is already painted and only the colour is changing, go to colour and finish. If there is a stain or damp, establish the cause first.

What questions this section answers

The most frequent questions fall into six topics:

  • How much material and time a particular room needs.
  • How a surface is prepared and checked before painting.
  • How colour and sheen are chosen for the room's use.
  • What to do when there is damp or staining.
  • How exterior work is planned around the weather.
  • How work is handed over and what information to keep.

Which figures recur across every guide

A few numbers come back constantly: one litre usually covers 10-12 m² in a single coat, a second coat follows after 2-4 hours, a film goes on hardening for up to 28 days, and the application conditions are between +5 °C and +30 °C with humidity below 80%.

Where those figures come from

The exact values are always set by the technical data sheet for the specific product — these guides describe the typical range. For further explanation, see the manufacturer's drying guidance and our service descriptions.

Calculator

Paint quantity and area calculator

Estimate the wall and ceiling area of a rectangular room and the litres of paint needed using your product's coverage.

Surface preparation

Colour, materials and light

Wet rooms and damp

Facade and common areas

Planning, budget and hiring

YOUR SPACE IS NEXT

Let's bring a new colour to your space.

Tell us about your project. The location, dimensions and current condition will help us understand the work.